HOME > Product Category > CNC Milling Machine > CS-G450A:CNC Milling Machine

CS-G450A:CNC Milling Machine
  • THREE-AXIS SIMULTANEOUS FEED AND RAPID TRAVERSE 
    Instead of having each axis driven by a separate tiny motor, MILL uses a single powerful 3 H.P. motor to drive all three axes. This means you can be simultaneous feeds or rapid traverse on the table and the knee.
    The availability of power-feed on the knee (in addition to rapid traverse) enables you to do deep boring and drilling on large work pieces.
  • CROSS FEED LEADSCREW MOUNTED IN MIDDLE OF KNEE
    No more side-mounted cross leadscrew exposed to chips and dirt. The MILL crossfeed leadscrew is located inside the knee, centered so that the table movement in-and-out will not have any vibration due to uneven surface contact between the saddle and the knee.

SPECIFICATION
  CS-G450A
TABLE
Working surface
1300 x 300mm
Travel longitudinal x cross x vertical
1500 x 300mm (Optional)
950 x 320 x 470mm
T-slot (wide x no.x pitch)
16mm x 3 x 70mm
Feeds 12 steps
Longitudinal x cross (60Hz)
13~621mm/min
Longitudinal x cross (50Hz)
11~517mm/min
Vertical (60Hz)
7~316mm/min
Vertical (50Hz)
6~263mm/min
Rapid traverse
Longitudinal x cross (60Hz)
2960mm/min
Longitudinal x cross (50Hz)
2467mm/min
Vertical (60Hz)
1520mm/min
Vertical (50Hz)
1267mm/min
Swivel table (left & right)
OPTIONAL
VERTICAL SPINDLE
Spindle nose
ISO R297 No.40
Spindle speed
(60Hz)
85~3150 rpm
(50Hz)
70~2625 rpm
  Change of spindle speed
12 steps
Distance from spindle end to table
130~600mm
Distance from center of spindle to column
100~610mm
Quill feeds
0.048, 0.096, 0.192mm/rev
Quill travel
130mm
Swivelling angle of head (left & right)
45 deg
Cross travel ram
510mm
Horizontal rotating angle of ram
360 deg
HORIZONTAL SPINDLE
Spindle nose
ISO R297 No.40
Spindle speed
(12 steps)
(60Hz)
45~1700 rpm
(50Hz)
36~1415 rpm
Distance from center of spindle to overarm
182mm
Distance from center of spindle to table
22~492mm
MOTORS
For vertical spindle
AC 2.2kW -4P
For horizontal spindle
AC 3.7kW -4P
For table feed and rapid traverse
AC 2.2kW -4P
For cutting fluid pump
AC 0.1kW -2P
MACHINE SIZE
Floor space
670mm x 1200mm
Overal height
2390mm
Net weight (Approx.)
2650 kg

*Design and specifications are subject to change without prior notice.